Step 1: Pasang Kabel Jumper • VCC kita kasih kabel merah. GND kita kasih hitam. SDA kita kasih kabel kuning. SCL kita kasih kabel hijau Step 2: GND Modul >> GND Arduino • Kita pasangkan GND Modul >> ...

This is tutorial number 1 from our series of Arduino tutorials and in this part I will talk about blinking an LED using the one already available on the Arduino Uno board or using an external LED to ...

Turns on and off a light emitting diode(LED) connected to digital pin 13, when pressing a pushbutton attached to pin 2. pushbutton attached to pin 2 from +5V 10K resistor attached to pin 2 from ground ...

In this project, we're making a cool 4×4×4 LED cube with Arduino Nano. LED cubes, also known as LED Matrix, can light up your room, study space, or Maker area giving it a awesome cool look. Moreover ...

Here is a 3D light show that will astound you with its combinations. Inexpensive and easy to make thanks to an Arduino controller, the design enables you to play with the existing effects and, most ...

The real-life closeup image of a WS2812B LED is given below. You can see that the WS2812B die is connected to 3 individual LEDs namely Red, Green and Blue using gold wires. The video below shows the ...

[Alex] needed a project for his microcomputer circuits class. He wanted something that would challenge him on both the electronics side of things, as well as the programming side. He ended up ...

This is just a fun Arduino project that uses leds connected in circle as a ring to produce a rotation effect. You can adjust the spinning speed with a potentiometer and you can also set a minimum and ...