Perhaps one of the most common modules in an Arduino starter kit, the RGB LED lets you create all sorts of colors with just four pins from the Arduino. This tutorial demonstrates two ways to use this ...

The real-life closeup image of a WS2812B LED is given below. You can see that the WS2812B die is connected to 3 individual LEDs namely Red, Green and Blue using gold wires. The video below shows the ...

Building IoT projects with touchscreens used to be a headache, involving numerous components, messy wiring, and endless troubleshooting. But the ESP32-S3 Box-3 makes things way easier. It is an all-in ...

Infineon Technologiesは、Arduino設計コミュニティ向けのRGB照明およびモータ制御を対象としたシールド2種類を発表した。 両シールドとも、Arduino Uno R3と互換性があり、32ビットマイコン「XMC1000」ファミリを搭載した「XMC1100 Boot Kit」と組み合わせて使用できる。

In this experiment, you will make an RGB LED controlled by digital pins 11, 10, and 9 (PWM) intermittently light up. The RGB LED has 3 LEDs inside, where pin 11 controls the red LED, pin 10 controls ...

DIY RGB LED strip driver that can be connected to a smart home (HomeKit) using Raspberry Pi and Arduino. This is a complete DIY guide going through all steps on how to build your own RGB LED Strip ...

This system uses a colour-changing LED (RGB LED/tri-colour LED) that switches to a new colour every 5 seconds. Simultaneously, the colour name is displayed on an OLED mini screen (SSD1306). This ...