An active cooling solution for Nvidia Tesla P100 PCIe GPUs, which have no built-in active cooling. An Arduino Nano handles PWM fan control and tachometer measurement in hardware; a Python systemd ...

Proper thermal dissipation is an essential rule for nowadays electronics. The best operating temperature for the electronic components is 25 degrees (standard room temperature). Thermal dissipation in ...

PWM or Pulse Width Modulation has generally been regarded as too complicated for PC fan speed control compared against using rheostats or linear voltage regulators such as the LM317. I present here a ...

- D11 is driven by Timer1 interrupts to keep about 25 kHz PWM on the new pin. - D3 is assumed HIGH = fan 12 V on, LOW = fan 12 V off. - The LED bar uses measured RPM, not the potentiometer command. - ...

This project presents the design and implementation of a dual-fan PWM cooling circuit, integrating a compact and efficient power supply with intelligent fan speed regulation. This project presents the ...

Well, I'm using Noctua fans which are damned well made. I was originally going with Redux fans, but I found them too noisy, so I'm going to return them in favour of NF-S12A PWM which come with a 1:2 ...

The TC648B is a PWM fan speed controller with auto-shutdown, fan restart, and FanSense™ technology for fault detection. The device features over-temperature indication, efficient PWM drive, and it ...

This little fan module is super handy for electronics projects, especially if you’re into robotics or Arduino. It runs on 5V DC, so it’s easy to power from a USB port, battery, or microcontroller. The ...